The Residual World::Tag = 'Structure'
Entries that have been tagged with 'Structure'.-
by Nic Plum on Thursday 10 February, 2011 - 13:48 GMT
ISO/IEC 42010 advocates or, more likely, is predicated on the assumption that an architecture description of a complex system needs many architecture views.
Since the initial publication of IEEE Std 1471, there has been wide acceptance for the use of multiple viewpoints to express architectures of systems, and for system concerns as a primary motivation for the content of architectural descriptions. This revision builds upon these core concepts, and captures additional consensus in the areas of architecture frameworks and architecture description languages.
Each view describes the real world architecture and addresses a different set or concerns or questions posed. The typical concerns each view addresses are defined within an architecture viewpoint which is a specification for each view type. Note that this use of ‘viewpoint’ is not that same as that used in MODAF and DODAF where viewpoint is a collection of architecture views, not a specification.
Pretty obviously these need to overlap so that the reader can move around the architecture description and also understand the context for any part. For example there’s no point in showing a function without showing the thing that performs the function and this in turn might realise or implement part of a concept. Overlapping views are therefore a good thing. This in turn requires overlap between the defining viewpoints (ISO terminology).
Whilst some overlap is always good, too much overlap in invariably bad. If there is too much overlap in the things that can be shown in different view types then it becomes difficult if not impossible for the reader to understand the purpose of each view type and differentiate between them. It also leads to inconsistency in the way that an architect approaches the task since if the same content can be shown on 2 view types one architect might choose one view type and another might choose the second. From the reader’s point this is confusing since there is no clear expectation in terms of finding particular objects and relationships. In essence it is a human factors problem since with too much overlap the affordance suffers as there is no longer a clear distinction between view type and the likely view content. From the point of ISO/IEC 42010 the risk is that there is no longer any clear distinction in terms of the concerns addressed by each view type.
This is best illustrated by practical example. The following is taken from MODAF 1.2.004 and looks at the MODAF::SV-1 Resource Interaction Specification View vs the MODAF::SV-2 set (SV-2a System Port Specification View, SV-2b System Port Connectivity Description View and SV-2c System Connectivity Clusters View).
The MODAF System Viewpoint states:
The primary purpose of an SV-1 is to show resource structure; i.e. to identify the primary sub- systems, posts and roles and their interactions. SV-1 contributes to user understanding of the structural characteristics of the capability.
but goes on to add:
In its simplest form, an SV-1 can be used to depict systems and sub-systems, and identify the interfaces between them; however, this rarely adds more to that which can be shown in an SV-2, product.
If possible, an SV-1 will show resources and their interactions for the entire architecture on the same diagram
It’s immediately confusing since the stated intent is to show structure (despite the name of the view) but then adds interactions and itself identifies that there is hardly any difference between the SV-1 and SV-2 since both can legitimately be used to describe both structure and identify interfaces between the structural parts. In terms of the definition there is no distinction between the different concerns addressed and therefore you might choose the SV-1 to describe structure and interaction whilst I might choose the SV-2. [Note: The MODAF::SV-2 can only be used for System and Software not for Human Resource (Organisation, Job and Role) unlike the MODAF::SV-1]
At 1.2.004 there is even less differentiation since it now can be used not only to identify but to characterise interfaces:
If SV-1 is developed as a composite structure model (e.g. in SysML, UML), Resource Ports may be used to convey how interactions are dealt with internal to the resource when the resource has parts. Resource Ports may also specify the interfaces they require or provide.
(As an aside there are also inconsistencies between what appears in the textual description, the data objects and the fragment of simplified metamodel since the data objects section does not appear to list all the types of object that can appear on a SV-1.)
There is so much overlap between the MODAF:SV-1 and SV-2 that it is no longer clear what distinguishes the two (you can show structure and interactions on both) and therefore why you need both. Certainly the stated emphasis on structure isn’t reflected in the definition of the SV-1.
To be fair to MODAF this looks to be a problem inherited from DODAF:
Systems Viewpoint. SV-1: Systems Interface Description
A primary purpose of a SV-1 DoDAF-described Model is to show resource structure, i.e., identify the primary sub-systems, performer and activities (functions) and their interactions. SV-1 contributes to user understanding of the structural characteristics of the capability.
The NATO Architecture Framework, version 3.1 doesn’t state a structural intent quite as boldly although it does say for the NSV-1 System interface description:
In a sense NSV-1 and NSV-4 provide complementary representations (structure and function)
structural were limited to composition and configuration relationships and exclude flows then the SV-1s would be structural. They don’t, however, and the fact that their name includes
Interface (not structure) suggests that the intended focus of each of these views are the flows. Very much a case of mixed messages which doesn’t help the architect.
This shows that it is vital to keep clear water between the focus and therefore the concerns addressed by each view type.
- MODAF is Dead - Long Live ‘NAF’? (30% )
- Risk and Threats - The Common Ground Between Security and Safety? (30% )
- What Would a TRAK View Look Like in a Graph Database? Part 1 (10% )
- Every Viewpoint Has to Be Distinct - Say “Goodbye” to the TRAK CVp-02 Concept Viewpoint (10% )
- Solution Risk, Vulnerability, Threat and Mitigation - Does Risk Need to be Separate from Event? (10% )
- ISO/IEC FCD 42010 Systems and Software Engineering — Architecture Description - latest draft. 8th June 2010
- The MODAF System Viewpoint. 26th April 2010
- DODAF 2.02. SV-1:: Systems Interface Description
- ANNEX 1 TO AC/322(SC/1-WG/1)N(2009)0005-ADD2 NAF V3.1 CHAPTER 5 22.214.171.124 NSV-1 System interface description. 1st March 2010
by Nic Plum on Saturday 02 January, 2010 - 14:03 GMT
Posted in Site
This current site is really only a interim site. What is intended is a site that properly supports the folks using TRAK or other MDAF-based architecture frameworks and one which represents the ethos behind it:-
- pragmatic - led by need and application - the human interface to the framework (usability, affordance etc.)
- open - decisions, rationale, explanation
- democratic - involve the community in the site content rather than broadcast top down what I/we think folks need. The centre of gravity ought to be with the users rather than the specifiers-of the framework
- fun - why not? Systems thinkers/engineers and architects are real, dare I say it ‘whole’ people and all sides need to be addressed
- dynamic - the content needs to be able to change and adapt to new circumstances, thinking or practice
What You Might Expect
The features that you should expect to see are:-
- each section of the site is a ‘blog’
- articles can be discussed and commented on by site members
- updates notified by RSS news feeds
- articles can be linked together, tagged, put into categories and dynamically sorted/displayed and searched for by users
- discussion forums
- tool support
- use of architecture frameworks
- modelling / repository organisation - not governed by frameworks but important and common to all
- architects can submit examples of views to help others
- wiki to hold facts on architecture frameworks e.g. metamodel elements, use of UML tools, tips, plugins etc.
- single sign-on to comment, add a forum discussion or to add to the wiki
- everyone can see everything - nothing hidden
- only site members can contribute or comment - contributors and commenters recognised and stand up to the mark!
- fun / anarchic humour
- the lighter side
- not taking life too seriously
- This is But One Part of a Bigger “Whole” (29% )
- Risk and Threats - The Common Ground Between Security and Safety? (14% )
- Architecture Description Language (ADL) vs Architecture Framework (14% )
- Standards - Site Appearance in Internet Explorer 8 vs Anything Else (14% )
- Keep Clear Separation Between the Concerns that Each Architecture View Addresses (14% )